How to Jumpstart a Car

How to Jumpstart a Car
Share Now

Table of Contents

One basic skill that each driver ought to have been jump starting an automobile. The capacity to jumpstart a car can come in convenient when faced with a startling dead battery or helping a fellow driver. It can moreover spare headaches, cost, and time. This is often a careful guide on jumpstarting a vehicle securely and successfully.

Knowing the Fundamentals

Before digging into the detailed method, it is basic to comprehend the reasons behind car battery failure and the fundamental standards of jump-starting.

Typical Reasons for a Dead Battery:

  • Leaving Lights on Electrical lights, such as headlights or interior lights, left on when the engine is off can deplete the battery.
  • Old Battery: A car’s battery should last three to five years. An outdated battery might not be able to keep a charge.
  • Extreme conditions: Battery performance can be impacted by both hot and cold conditions.
  • Problems with the Alternator: The battery may die if the alternator isn’t charging it while the vehicle is moving.
  •  Parasitic Drain: Electrical parts that keep running even when the engine is off may drain the battery.

Why is Jumpstarting Your Car Safely Important?

For several strong reasons, safely jumpstarting your car is crucial:

  • It shields you, first and foremost, from potentially fatal electrical shocks and battery explosions, which can happen if the proper protocols are not followed.
  • Second, a safe starting guard against harm to the delicate electronic parts of your car, which, if harmed, could require expensive repairs.
  • Furthermore, knowing how to begin a car correctly guarantees that you can confidently manage emergency circumstances, lowering tension and potential roadside risks. In the long term, proper jump starting saves you money by prolonging your vehicle’s battery life.
  • Furthermore, by adhering to safe procedures, you promote a culture of responsible car ownership by safeguarding yourself and everyone helping you.
  • Finally, investing the effort to become knowledgeable about safe jumpstarting techniques will pay off handsomely in terms of your safety, car longevity, and peace of mind.

Safety Precautions

Prioritizing safety is paramount when it comes to jump starting an automobile. Take the following safety measures:

  • Examine the battery. Examine both batteries for damage, leakage, or cracks. Never try to jumpstart a damaged battery.
  • Steer clear of sparks: batteries might release explosive fumes. Make sure nothing is smoking or burning openly close to the batteries.
  • Go through the manual: Certain cars come with detailed instructions on how to jumpstart them. Consult the owner’s handbook.

What You’ll Need?

Tools Required:

  • Jumper Cables: These should be good quality and have well-insulated clamps.
  • A Second Vehicle With a charged battery of the same voltage (usually 12 volts).

How to Jumpstart a Car?

Here is a step-by-step Guide to Jumpstarting a Car:

1. Position the Vehicles

  • Place the operational automobile next to the non-operational one, keeping them apart.
  • Orient the cars so that the batteries are as near each other as feasible.

2. Switch off the two cars

  • Put the parking brakes in place.
  • Locate the batteries by opening the hoods. Determine which terminals are positive (+) and negative (-)

3. Link the jumper cables together

  • Red to Dead: Fasten a red clamp to the dead battery’s positive terminal.
  • Red to Donor: Join the positive terminal of the good battery with the other red clamp.
  • Black to Donor: Fit one black clamp into the good battery’s negative terminal.
  • Black to Metal: Affix the last black clamp, away from the battery, to an unpainted metal surface on the dead car’s engine block or chassis. This provides a solid foundation.

4. Turn on the functional vehicle

  • Start the car’s engine with a functioning battery and give it a few minutes to run.

5. Turn on the dead car

  • Try using the dead battery to start the car. Wait a few more minutes and try again if it doesn’t start.
  • To recharge the battery, let it run for at least 20 minutes if the car starts.

6. Take the jumper cables out

  • Reverse the sequence of the jumper cables and remove them carefully:
  • Dark grip from the metallic surface.
  • Black clamp connected to the good battery’s negative terminal.
  • Red clamp connected to the good battery’s positive terminal.
  • Red clamp from the dead battery’s positive terminal.

7. Operate the Vehicle

  • Make sure the battery is adequately charged by driving the automobile for at least 20 to 30 minutes. Do not turn off the engine while doing this.


For every driver, being able to jumpstart an automobile is a crucial ability. It guarantees you can assist those in need and are ready for unplanned battery outages. By using this guide, you can prolong the life of your car’s battery and safely and successfully jumpstart it. You can also quickly get back on the road. Recall that ensuring a smooth driving experience and preventing future problems require routine maintenance and appropriate battery care.

Related Blogs

Scroll to Top