Sunday - Saturday 8 am - 9 pm

If your automobile jerks when you speed, this is a symptom that there is a more significant problem with your vehicle. The sooner you can determine the problem, the less damage your car will sustain, and the expenses of repair will be lower. You should not overlook this condition; instead, take it to a skilled mechanic before it worsens.

Although, in other circumstances, shuddering or trembling while accelerating or otherwise can indicate more serious issues lurking in the vehicle that must be addressed promptly.

1. Broken Acceleration Cable

The acceleration cable is a braided metal pad that mechanically connects the gas pedal and the throttle plate, allowing you to commence acceleration and manage the engine’s spinning power. They are entrusted with opening the throttle whenever the gas pedal is pressed.

Any problem with the throttle cable, such as overstretching or wear on the braided cable, might result in ineffective acceleration, with the reaction being delayed or producing jerks while accelerating.

2. Contaminated fuel injectors

Fuel injectors are the most frequent causes of jerky acceleration. Because of the filthy injector, your automobile loses power when you try to accelerate from a stop and when you intend to drive at a regular speed. This is due to an engine misfire.

3. Worn-out spark plugs

Spark plugs typically last an extended period, but as with most replaceable components, they might occasionally begin to lose performance before the end of their service interval. And, because spark plugs are such a critical ignition component responsible for igniting the air/fuel mixture, it is normal to experience sudden jerks when they are off. The effectiveness of a spark plug is also transferred to the first acceleration you feel from the ignition, which can assist you in assessing whether or not you have defective spark plugs.

The electrodes of the high nickel alloy spark plugs improve acceleration by giving a forceful yet seamless ignition. However, suppose the electrodes wear down enough. In that case, they may begin to impact the ignition process at each step, causing rough starting, poor idling, and sometimes shaking when accelerating from a standstill.

4. Clogged fuel or air intakes

Car engines require both air and gasoline to function. Inside your engine, air mixes with fuel and is ignited by the spark plugs, resulting in an explosion that pushes the pistons. This cycle repeats itself, allowing your car to move. However, if a blockage occurs in the lines that let fuel or air into your engine, this cycle is disrupted, causing your automobile to jerk as you try to accelerate. If one of these intakes becomes clogged, a check engine light will typically illuminate; remember, never ignore your check engine light; instead, take it to a service center straight away!

5. Transmission Error

As the component that connects the wheels to the engine, the transmission system is one of the most apparent causes of jerks when accelerating uphill. This is because the transmission system adjusts the wheel’s drivability in accordance with the engine’s speed and torque. So, if you experience jerkiness in shifting gears while accelerating, a damaged transmission could be to blame. You must get it checked and repair your transmission to avoid future issues.

6. Moisture that has accumulated

Moisture accumulating in your car’s distributor cap might cause your car to lurch while accelerating, causing your engine to misfire. This is especially likely if you are parked outside in cold weather. On cold and wet days, the most accessible approach to avoid this is to park in a warm, dry location.

7. Catalytic Converter Obstruction

This is one of the few instances in which your vehicle may jerk when accelerating without a check engine light check on the dashboard. This is because catalytic converters, which are located beneath the exhaust system, oxidize unburned hydrocarbons and carbon monoxide.

Though the check engine light may identify a dirty catalytic converter, this may only occur if the catalyzer has become faulty. If your automobile hesitates when accelerating despite the absence of a check engine light, probing the exhaust for sulfur or rotten egg odors may help you diagnose the problem while also preventing that unpleasant odor from entering your cabin.

8. Wheels that are misaligned

Wheel alignment issues, albeit not usually, can cause tremors when accelerating at low speeds. If everything in your vehicle appears to be in order, a check of the alignment may be in order. Observing a progressive increase in shudders as the wheels lose balance and alignment over time can yield categorical answers.

It can also be to blame for any shudders you experience while driving. For example, a suspension that is out of balance is known to generate vibrations in the wheels and shaky vehicle movement.

9. Cylinder Damage

If your engine cylinders are damaged, your engine will be unable to function correctly, resulting in an engine misfire. You should contact a mechanic about this problem so that the cylinders can be repaired or replaced. Otherwise, you risk damaging your engine.

10. Gas Line Damage

Gas lines transport gas throughout your engine. However, if there is a problem with a gas line, your car may experience a loss of pressure, causing the vehicle to jerk forward. In extreme cases, a faulty fuel line could cause your engine to catch fire. Check the gasoline line to check sure it doesn’t have any holes.

Conclusion Words

These are the causes why your car jerks while accelerating. So, strive to keep all engine parts clean and oiled on a regular basis. As a car owner, you must be aware of this vital maintenance tip. Also, because of engine difficulties, your automobile jerks when accelerating; therefore, proper fuel utilization for your car’s engine is essential for proper operation.

what we do

We'll make your car feel brand new,
visit our workshop today.

Book an Appointment

    Get free

    Appointment

    Open Sunday - Saturday

    8 am - 9 pm